Tag Archives: pipe

Crack Kills: Florida Woman Dies After Smuggling Rocks And A Glass Pipe In Her Box During Arrest

Posted on December 26, 2014 by Benny Hollywood

Drugs are bad, m’kay? A Florida woman is dead after stashing crack in her… crack. According to BayNews9 reports : A woman found with a crack pipe hidden in a body cavity after her arrest on drug charges Dec. 16 died Monday night, a week after going into medical distress, Polk County authorities said. An autopsy will be conducted on April Rollison, 31, who was one of four people arrested together on drug charges, according to the Polk County Sheriff’s Office. A body scan at the jail revealed two “foreign bodies” in Rollison’s vaginal area, and she was taken to Bartow Regional Medical Center to have them removed, deputies said. While Rollison was in a private room, a nurse and deputy saw her with a prescription bottle in her hand containing two grams of crack cocaine and a white substance, later identified as cocaine, investigators said. Rollison was examined, and a glass crack cocaine pipe was removed from her vagina. She was medically cleared and taken back to the jail for booking, authorities said. But when she arrived back to booking, she went into medical distress. She was taken back to the hospital and remained in critical condition until dying Monday night, investigators said. Preliminary tests on Rollison were positive for methamphetamine, amphetamine, cocaine and cannabis, the sheriff’s office said. She is suspected of ingesting cocaine. Family members told investigators Rollison had been using drugs since about 12 and they had not had contact with her in about two years. Before her death, Rollison was charged with possession of cocaine and drug paraphernalia and introduction of contraband into a detention facility. The sheriff’s office said she has had numerous drug charges. All bad… Crazy that they can even say how much was in the prescription bottle but they couldn’t stop her from taking it. You ever notice nobody ever says “they died doing what they loved” when an addict overdoses? SplashNews/ Shutterstock Continue reading →

→ Leave a comment

More Galleries

Steve Aoki Talks Torn Abdominals, Afroki and Imagine Dragons Collabos

Posted on May 24, 2013 by Benny Hollywood| Leave a comment

The injured DJ doesn’t have time to recuperate, not with so many collaborations coming down the pipe. By James Montgomery, with reporting by Sway Calloway

Read this article:
Steve Aoki Talks Torn Abdominals, Afroki and Imagine Dragons Collabos

→ Leave a comment

Posted in Celebrities, Gossip, Hollywood, Music

Tagged , , , , , , , , , , , ,

Bad Momma Put On Blast: Kid Brings Mother’s Crack Pipe To Show And Tell

Posted on September 21, 2011 by Benny Hollywood| Leave a comment

This is a hell of a way to get caught. Michelle Marie Cheatham, 32, was arrested on Sept. 6 after her son pulled out methamphetamine and his mother’s crack pipe during a show-and-tell for his kindergarten class, according to a felony complaint filed in the Saline County Circuit Court. Later that day, a search warrant was obtained by the Sweet Springs police to conduct a search at Cheatham’s home, which led to the police reportedly recovering a crack pipe and a butane lighter, according to the Marshall Democrat-News. Cheatham was charged six days later with two class C felonies – the first for possession of a controlled substance and the other for endangering the welfare of a child. Each charge includes punishments of up to seven years in the Missouri Department of Corrections system and up to a $5,000 fine, according to the felony complaint. The “several baggies of Crack Rocks” discovered in the boy’s backpack were worth around $3,700, according to the St. Louis Post-Dispatch. $3,700?! Hopefully none of the kids in the class recognized the pipe and the crank. Sad, sad, story.

The rest is here:
Bad Momma Put On Blast: Kid Brings Mother’s Crack Pipe To Show And Tell

→ Leave a comment

Posted in Celebrities, Hollywood, Hot Stuff

Tagged , , , , , , , , , ,

Will This Stop the BP Oil Leak?

Posted on June 2, 2010 by Benny Hollywood| Leave a comment

THIS IS MY SOLUTION FOR SEALING THE BP OIL LEAK If British Petroleum does decide to cut the up-riser off, this will expose the raw shaft into the well. It is vertical without any bends or debris and this will give them a straight shot down the well. This metal rod is telescoped in design so that it is smaller on the tip and gradually graduated into a larger diameter. The final diameter is fairly close tolerance to that of the well pipe. This end of the metal rod has a series of O-rings or seals that will help to seal the final stage. The top of the rod will basically have an oversize head on it so it will stop the rod from descending any further down the well than is desired. The rod I have shown is tapered or telescoped so it will allow the oil pressure to bypass the rod initially upon insertion. Once it has entered the pipe, the weight of the rod is more than adequate to overcome any of the oil pressures being exerted as it is approximately 20 to 25 feet long, and about 21 inches in diameter at the sealing end. The well pipe will guide the rod accordingly down the throat due to the telescoping shape of the rod. Once it bottoms out against the head and the top of the fresh cut pipe, the seal will be complete. The well will be plugged permanently but the rod still has the ability to be removed if needed. The rod can be made of stainless steel or whatever is best for this application. It can be solid or if desired it can be hollow for the purpose of still pumping oil. The ring on top would still need to be present for any continued modifications or repairs. A ball valve would need to be implemented into the design as shown in the diagram and a series of in-flow ports would need to be added along the lower extremities of the rod for the oil to enter and flow through the rod. It would be a good idea to have two ball valves, (not shown), one on top of the other in case of failure of one or the other. If the rod is hollow, then it needs to be longer so the loss in weight would be regained. The weight needs to be sufficient to force the rod into the well pipe and cause it to seat. This would seal the well as there would be no place for the oil to find a by-pass. I have other solutions that will work if the decision is to plug the up-riser and the pipe that has currently been the focus. JuliusBC Inventor/designer added by: JuliusBC

→ Leave a comment

Posted in Celebrities, Hot Stuff

Tagged , , , , , , , ,

Is This a Solution to Stop the BP Oil Leak?

Posted on June 2, 2010 by Benny Hollywood| Leave a comment

THIS IS MY SOLUTION FOR SEALING THE BP OIL LEAK If British Petroleum does decide to cut the up-riser off, this will expose the raw shaft into the well. It is vertical without any bends or debris and this will give them a straight shot down the well. This metal rod is telescoped in design so that it is smaller on the tip and gradually graduated into a larger diameter. The final diameter is fairly close tolerance to that of the well pipe. This end of the metal rod has a series of O-rings or seals that will help to seal the final stage. The top of the rod will basically have an oversize head on it so it will stop the rod from descending any further down the well than is desired. The rod I have shown is tapered or telescoped so it will allow the oil pressure to bypass the rod initially upon insertion. Once it has entered the pipe, the weight of the rod is more than adequate to overcome any of the oil pressures being exerted as it is approximately 20 to 25 feet long, and about 21 inches in diameter at the sealing end. The well pipe will guide the rod accordingly down the throat due to the telescoping shape of the rod. Once it bottoms out against the head and the top of the fresh cut pipe, the seal will be complete. The well will be plugged permanently but the rod still has the ability to be removed if needed. The rod can be made of stainless steel or whatever is best for this application. It can be solid or if desired it can be hollow for the purpose of still pumping oil. The ring on top would still need to be present for any continued modifications or repairs. A ball valve would need to be implemented into the design as shown in the diagram and a series of in-flow ports would need to be added along the lower extremities of the rod for the oil to enter and flow through the rod. It would be a good idea to have two ball valves, (not shown), one on top of the other in case of failure of one or the other. If the rod is hollow, then it needs to be longer so the loss in weight would be regained. The weight needs to be sufficient to force the rod into the well pipe and cause it to seat. This would seal the well as there would be no place for the oil to find a by-pass. I have other solutions that will work if the decision is to plug the up-riser and the pipe that has currently been the focus. JuliusBC Inventor/designer added by: JuliusBC

→ Leave a comment

Posted in Celebrities, Hot Stuff

Tagged , , , , , , , , ,

Legendary DJ Spoke to AM Day Before He Died

Posted on August 29, 2009 by Benny Hollywood| Leave a comment

Filed under: DJ AM DJ Premier — one of the most famous DJs and hip-hop producers of all-time — spoke with DJ AM on the day before he died. In an audio clip posted on his website, Premier talks about a sneaker line he had coming out with DJ AM and how the two had …

View original post here:
Legendary DJ Spoke to AM Day Before He Died

→ Leave a comment

Posted in Gossip, Hot Stuff

Tagged , , , , , , , , , , , ,

Tito Ortiz’s Pipe Dreams

Posted on August 22, 2009 by Benny Hollywood| Leave a comment

Filed under: Wacky & Weird Tito Ortiz is used to flexing his massive pipes in the octagon — but this weekend at the Pomona Fairplex, he was showing off a pipe of a different kind … the kind you smoke, er, things out of.Jenna Jameson’s babydaddy was given the glass pipe by a … Permalink

See original here:
Tito Ortiz’s Pipe Dreams

→ Leave a comment

Posted in Gossip, Hot Stuff

Tagged , , , , , , ,